Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
truckjunky87

Finding Engine error codes and resetting them

Recommended Posts

truckjunky87

2013 VTX with 350 monsoon - new to me last fall and picked up a misfire code.

When it happened there was someone at the docks who showed me how to navigate the menus to read the error code but for the life of me I can't seem to do it now.  Any one able to talk me through it again?

 

Also, I've replaced all ignition components and want to get the code cleared.  If I remember what I've read it will clear after three start/cool down cycles up to 160F - is that correct?  

Anyone know how cool it needs to get back down to in between cycles?

Share this post


Link to post
Share on other sites
oldjeep
Posted (edited)

Yes, supposedly it will auto reset if you go through 3 cycles.  It has to get pretty cool, just turning it off for an hour after running on hose was never enough.

  Otherwise the only way to clear it is with the diacom software.

As for the menu navigation, it is in the owners manual.  If you click on the resources section above you can download one if you don't have it.

 

Edited by oldjeep

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...