Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

spinxt

Gauge Panel Removal- 2003 LXi

Recommended Posts

spinxt

I’m trying to access behind the gauges on my new (to me) 2003 LXi.  Can anyone shed some light on how I get the upper dash gauge panel out?  The only screws I see are the ones holding the Malibu emblem in place.  My 2000 Response had at lest 6 or 8 easily identifiable Allen screws.  Not the case in the LXi

Any help would be appreciated!

 

 

Share this post


Link to post
Share on other sites
roeboat

I believe its the two that hold emblem and there is one screw above the center gauge. Then it should just pop out. There might be more but I can't remember. 

Share this post


Link to post
Share on other sites
oldjeep
Just now, roeboat said:

I believe its the two that hold emblem and there is one screw above the center gauge. Then it should just pop out. There might be more but I can't remember. 

Yup, just those 3 on the inlaws 04 lxi

Share this post


Link to post
Share on other sites
UWSkier
Just now, roeboat said:

I believe its the two that hold emblem and there is one screw above the center gauge. Then it should just pop out. There might be more but I can't remember. 

This.  Three screws.  The one above the center gauge goes almost straight up and is a phillips head.  The two holding the Malibu emblem on are likely allen heads.

Share this post


Link to post
Share on other sites
ORMailbuboater

My 2001 Sunsetter LXi had one more black screw mounted that blends in just underneath the lip on the top just like the others said.   Here is a picture for location.  Good luck.  

image.thumb.png.e023e6ac38cb2777f3dfb36596c09782.png

Share this post


Link to post
Share on other sites
spinxt

Thanks everyone. Just waiting for a new throttle cable for the Perfect Pass I’m swapping over from my 00’ RLX....should be an easy swap.  Perfect pass tells me the power, ground, and RPM Wires are ready to go behind the dash in the 03’.  This was not the case in my 00’

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...