Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

home brew dsp to Rca connectors


Orangemxz

Recommended Posts

20190302_145121.jpg I thought I would post these pics. I decided to make my own. Not the prettiest thing but they work great. If you know how to plug in a soldering iron you can pretty much make em. Cost was about $36.20190302_144659.jpg20190302_144656.jpg20190302_134844.jpg

  • Like 2
Link to comment

To do it a little cleaner (without needing to bend all the pins) consider getting some molex header pins to put on the wires. I’d still use the heatshrink like you did over the wire/pin interface. 

Link to comment

those would work but I wanted to avoid additional connections. I realized after the fact that I could pull the pins out solder and reinsert them. With that method going forward they will be  alot cleaner looking.

Link to comment
  • 3 weeks later...

Do you guys have the plug part number. I have an 18 22MXZ and have been looking for a dealer to retune my amps the boat sounds like crap. I have 4 rev 10s on the G4 tower and now I’m just going to replace the amps and do it myself. Malibu’s biggest mistake was going away from ROckford in my opinion. 

Link to comment

Ok guys I started my switch over to new amps here are the part numbers of the connectors I’m using and a 3D printed close out 

8 pin connector for the tower amp is a digikey p/n A106572-ND manufactures p/n 1-776276-1

14 pin connector for the 6 channel amp is a digikey p/n A106523-ND manufactures p/n 1-776262-1

Here are what the backs look like I’ll take more pics after I solder everything together. If you want the file to print shoot me a PM or email and I will send it your way.

 

2FD2BCA7-ABE1-4A59-B6B8-2D848E1BBF54.jpeg

6BF18808-7321-4B7C-AD4E-D4121C5534D0.jpeg

F473D550-4B8E-44B2-B3B8-E460E7FF9169.jpeg

Edited by pbnj429
Adding pics
  • Like 3
Link to comment
  • 8 months later...
  • 3 months later...
On 4/7/2019 at 1:37 PM, pbnj429 said:

Do you guys have the plug part number. I have an 18 22MXZ and have been looking for a dealer to retune my amps the boat sounds like crap. I have 4 rev 10s on the G4 tower and now I’m just going to replace the amps and do it myself. Malibu’s biggest mistake was going away from ROckford in my opinion. 

 

Edited by Rattler
Old
Link to comment
  • 5 months later...
On 4/12/2019 at 10:39 PM, pbnj429 said:

Ok guys I started my switch over to new amps here are the part numbers of the connectors I’m using and a 3D printed close out 

8 pin connector for the tower amp is a digikey p/n A106572-ND manufactures p/n 1-776276-1

14 pin connector for the 6 channel amp is a digikey p/n A106523-ND manufactures p/n 1-776262-1

Here are what the backs look like I’ll take more pics after I solder everything together. If you want the file to print shoot me a PM or email and I will send it your way.

 

2FD2BCA7-ABE1-4A59-B6B8-2D848E1BBF54.jpeg

6BF18808-7321-4B7C-AD4E-D4121C5534D0.jpeg

I know this is an older thread, but you made the RCA cables.  Did you make the other connectors also that hooked up to the DSP amps or did you just cut the wires and wire them into the amps?  Thanks for the help!

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...