Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Windshield detaching from frame?

Recommended Posts


I just saw that one of the windshields in coming off its frame and it looks like the previous owner had tried to use some sort of caulking to hold it in place... see photo...

I’m thinking of trying to remove the old caulking and then using perhaps Dow Corning 795?



Edited by Argonaut
Link to comment

I have some screws that hold the frame on.  Mine have backed out for a similar look.  Mine was a gasket not caulk and it fit back together and screwed tight.  May be a mising screw up in the corner

Link to comment

I found 3 screws that hold a vertical metal piece next to the windshield, no side gasket that I could see (unless there was originally though I don't see it on the driver's side). In any event, that was nice because I was able to completely remove the side piece, clean and sand down to bare aluminum for a really good prep.

This morning we have dry weather in Seattle :) I applied the Dow 975...fingers are crossed that it holds well :)

Btw, I used a spray called Marine Formula to help remove the previous caulking and it worked really well.



Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...