Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

G3 Rack Forks to Hold Wake Foil


bigpaps

Recommended Posts

hey I am working on creating some new forks to bolt into the G3 tower racks That are long to support wake surf boards and the new wake foil boards better. I am also working on a mount to support the foil. I am thinking of making the forks somewhere around 18 inches long and able to support a bird up to 2.5 inches. If anyone has any interest let me know so I can see about getting a quantity made. Thank you. James 

Link to comment

I’d be interested.  I’m planning on getting a foil board before the season starts.

few questions...

1. What do you anticipate the cost on these?

2. What material?  Will these be aluminum?

3. What finish?  Can you match the stock PTM clamping racks on a 2018?

4. Where will these mount?  Will it require replacing one of my existing racks, or could it be mounted in the upper position? 

Thanks,

MC

Link to comment
  • 2 months later...

Sorry for the delay getting back to you. At this time I am putting the replacement forks for the original racks to hold the wake foil on hold due to the foil hitting the Bimini top. I am trying to rework my design and see what I can come up with. I will post with updates once I come up with a new design.

James

Link to comment
  • 2 years later...
On 3/8/2019 at 10:51 PM, bigpaps said:

Sorry for the delay getting back to you. At this time I am putting the replacement forks for the original racks to hold the wake foil on hold due to the foil hitting the Bimini top. I am trying to rework my design and see what I can come up with. I will post with updates once I come up with a new design.

James

Did you end up doing this project?

I was wondering about 3rd printed holder for the mast that could attach to the tower.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...