Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Fish209

2007 Wakesetter LSV in Norman, Oklahoma - Anyone close?

Recommended Posts

Fish209

I am considering a 2007 Wakesetter LSV in Norman, Oklahoma. The price is within my budget and the pictures look good. I'm in Northern California so I can't check it out. Is anyone close to Norman Oklahoma? I'd be willing to pay a Malibu Crew member if someone would be able to go check it out for me :).

 

Boat Details:

  • 2007 Wakesetter LSV
  • 850 Hours
  • Seats reupholstered in early 2018
  • Two 600lb fact sacs plug and play ballast bags in rear lockers controlled by dash switch
  • Power Wedge
  • ESC was replaced 3 years ago
  • Custom Extreme trailer with LED lights
  • Custom Wet Sounds/JL audio stereo system (6 in-boat wet sound speakers, 5 tower wet sound speakers, wet sound equalizer, 3 wet sound amps)

 

6985863.jpeg

 

 

Edited by Fish209
Updated for accurate location

Share this post


Link to post
Share on other sites
Fish209

Or...does anyone know of a trusted Malibu service center near the Kingston, OK area I could arrange an inspection at?

 

How about Wilson Water Sports (they appear to be a certified Malibu service center) in Edmond, OK? Anyone know anything about them?

 

Even Dallas doesn’t look too far away.

 

Thanks for any help!!!

Share this post


Link to post
Share on other sites
Bozboat

Good looking boat, but a 4-5 hour round trip for me to look at it.  Keep asking, maybe you can find an oklahoma crew member near there

Share this post


Link to post
Share on other sites
nosnarb

Kingston would be a bit of a haul for me.  Any S. Oklahoma N. Texas members near Lake Texoma?

 

Wilson's are good people but they tend to stay busy.  Edmond is a long haul from Kingston.  I would think you would be better off trying to find someone closer to Texoma OR you could try Taylor's Wake Shop.  https://taylorswakeshop.com/  Taylor is a former Wilson's employee and has gone out on his own as a mobile boat shop.  I met Taylor through Wilson's several years ago and use Taylor to service my MC.

Share this post


Link to post
Share on other sites
windy1

3 hours from me and I am leaving for Colorado but I second what nosnarb said about Taylor. He definitely knows Malibu's. I didn't realize he left Wilsons.

Share this post


Link to post
Share on other sites
Fish209

Awesome, thanks guys!

 

I actually just found out the boat is in Norman, OK. Norman is much close to Wilson Water Sports in Edmond so that makes more sense that he can bring it to Wilson's. Now that I found out the boat is actually in Norman, does that open the door to anyone closer to the boat :) ???

Share this post


Link to post
Share on other sites
racer808
19 hours ago, windy1 said:

3 hours from me and I am leaving for Colorado but I second what nosnarb said about Taylor. He definitely knows Malibu's. I didn't realize he left Wilsons.

You're moving to CO?  We thought about moving to Tulsa, can afford a house on the lake there.

Share this post


Link to post
Share on other sites
shawndoggy

what is "ESC"?

Share this post


Link to post
Share on other sites
windy1
6 hours ago, racer808 said:

You're moving to CO?  We thought about moving to Tulsa, can afford a house on the lake there.

Just going to Breckenridge for thanksgiving (daughter lives there). The lakes are to good here to move away. If you get serious about moving to Tulsa let me know. I have been boating on the waters surrounding Tulsa since the 70's   

Share this post


Link to post
Share on other sites
Fish209

Thanks everyone!!! I spoke with Taylor (www.taylorswakeshop.com) and the seller. Taylor is going to perform a full inspection and lake test. If everything checks out and is in good working condition, it looks like I'll be pulling the trigger on this one soon :)

 

Thanks for all the help everyone!!!

Share this post


Link to post
Share on other sites
nosnarb
11 hours ago, shawndoggy said:

what is "ESC"?

Small square key towards the top left of the keyboard?

:biggrin:

Share this post


Link to post
Share on other sites
Fish209

^ lol.

 

I'm sure you guys probably already know, but it's a typo. It was meant to say ECM.

Share this post


Link to post
Share on other sites
Cazan

Why did they replace the ECM? That’s usually something that is not a maintenance item or something you have to replace. 

Share this post


Link to post
Share on other sites
Fish209
19 minutes ago, Cazan said:

Why did they replace the ECM? That’s usually something that is not a maintenance item or something you have to replace. 

I will ask. Thanks!

Share this post


Link to post
Share on other sites
Gavin17

Mine ecm was replaced also. The ignition coil zapped it.  It was before I purchased it.  I'm guessing the cap or plug wires got too corroded and the coiled arced to the ecm.  The boat had sat for a few years with little or no use.  After a new ignition system and new ecm we've been running great for 350 hours in 3 years.  

Share this post


Link to post
Share on other sites
TURNITRED
On ‎11‎/‎15‎/‎2018 at 8:55 AM, Fish209 said:

Or...does anyone know of a trusted Malibu service center near the Kingston, OK area I could arrange an inspection at?

 

How about Wilson Water Sports (they appear to be a certified Malibu service center) in Edmond, OK? Anyone know anything about them?

 

Even Dallas doesn’t look too far away.

 

Thanks for any help!!!

Wilson is great.  Todd and Laura will take good care of you.

Share this post


Link to post
Share on other sites
hawaiianstyln

Lots of family in Norman which is where Univ of Oklahoma is (where I went).  I'm sure they use that boat at Dirty Bird (lake thunderbird).  My cousin could go lake test it for you, he knows our boats probably because of me and always tows me when I pull my boat that way every summer.  However, honestly, I would have Wilson check it all out and pay a dealer.  They will provide a detailed response back.

Share this post


Link to post
Share on other sites
Fish209

I am actually working with Taylor Kress with Taylor's Wake Shop (www.taylorswakeshop.com). He used to work at Wilson's Water Sports (and then managed the place), but now does mobile services. He's going to be performing a full boat and trailer inspection and lake test.

 

Thanks everyone!!!

Edited by Fish209

Share this post


Link to post
Share on other sites
sChamblee
9 hours ago, Fish209 said:

I am actually working with Taylor Kress with Taylor's Wake Shop (www.taylorswakeshop.com). He used to work at Wilson's Water Sports (and then managed the place), but now does mobile services. He's going to be performing a full boat and trailer inspection and lake test.

 

Thanks everyone!!!

Sharp looking boat. I like the blue.

Share this post


Link to post
Share on other sites
cowwboy

Taylor is a great guy. He used to be a tech / salesman / pro at Wilsons and started his own shop.

He really knows his stuff. If you need a hand picking it up let me know. 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...