Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  

Electrical Issue with Power Wedge 2008 LSV

Recommended Posts


Need help please.  My power wedge stopped working.  First step was to check the fuse/breaker, which was blown.  I reset it and the wedge worked for a couple seconds, then stopped again.  Fuse/breaker did not trip.  I even replaced it thinking maybe it was bad.  No luck.  Next step was to replace the wedge actuators, which I did.  I can actuate the wedge by hooking them up directly to the batteries, so they are good.  I wired them up to the system and get nothing.  I unwired them and put my voltmeter on the wires from the Malivue, I get 11 volts near the motor where I would make my splice.  However, if I splice the wires, the voltage dissappears?????  No voltage detected.  I can unwire and get 11 volts.  What is going on with this system.  I have never seen something like this before?   I also need help getting this wedge working.  Thanks for any help you can offer. I am at a loss. 

Share this post

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...