Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Underwater Lights - Troubleshooting


LS1boarder

Recommended Posts

Hey crew! So I have a 2016 23LSV and it came with every option except for the underwater lights. I just installed the Seablaze X and they are bad a**! But I’m having a problem.... 

 

I bought the same harness as the boat uses and wired them into the existing wire setup. All works just fine (except I did blow a fuse and had to change to a 10amp). The lights are setup so that they cycle settings when you turn them off and back on. 

 

So so here’s the problem... I turn them on (cycles between blue and white), turn them off and back on (just white), turn them off and back on (just blue), then turn them off and back on again (white and blue combined) and they freeze in the on position. I have to reset the battery switch to turn them off again. The next setting is supposed to be strobe. 

 

Any clue what might be happening? 

 

Thanks all! 

Edited by LS1boarder
Link to comment
  • 7 months later...
  • 5 weeks later...
On 4/5/2019 at 9:34 AM, Clearprop said:

@LS1boarder did you ever figure the seablaze freezing in the on position?  I’m looking at this same setup for my 18’ 

No man, I just do the battery switch routine and power it off and back on. I want to figure this out though!! 

Link to comment
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...