Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Tuning an Exile 30.2 amp?


FatGoldChain

Recommended Posts

Hey Guys,

Not a stereo fanatic at all but was a little disappointed after a lot of reading about tower speakers etc.  At first I thought I was going to go with Exile Surf 9's and well after I started to piece my tower equipment together I ended up with a pair of REV10's, go figure. 

 

After install they are loud, but not impressive like i have heard them before.  So I am wondering, Power I believe I have enough at almost 300 RMS watts per speaker.  What I did not do was remove that sticker where all of the HPF LPF and Gain controls are.  It seems rather obvious thats where to start, just wondering if you all have some thoughts what the gain and HPF and LPF should be on or off or what.

Link to comment
1 hour ago, FatGoldChain said:

What I did not do was remove that sticker where all of the HPF LPF and Gain controls are.

Is this a used MB take-off? Only reason I can think there is a sticker covering the tuning controls. Yes, you need to remove the sticker and properly tune the amp. 

Link to comment
49 minutes ago, MLA said:

Is this a used MB take-off? Only reason I can think there is a sticker covering the tuning controls. Yes, you need to remove the sticker and properly tune the amp. 

No it was new in un opened box, sticker says warranty is void if removed or something like that.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...