Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
GREGFIEBER

Malivew screen blacked out

Recommended Posts

GREGFIEBER

if have a 2011 malibu VLX  22..   The maliview screen has blacked out on it,  i cant read the fuel guage or any of the screens for

setting up skiing or surfing, etc,    i had found a 20 amp in line fuse blown but that only resolved the alarm at 25 mph,

any ideas on trouble shooting of the maliview screen,   

we are a four hour drive from lake to the closest dealer in Winnipeg, MB

Share this post


Link to post
Share on other sites
ORMailbuboater

Obvious things you probably already have done but will mention.  

1) Check all cable\ wire connections.  Something may have come loose. 

2) Remove connectors from back of screen\computer and re-seat.  Could be dirty\poor connection.  

3) Assume you already checked all fuses and breakers.

4) Disconnect battery.  Either via battery switch off or remove one cable for 60 seconds or so to clear computer memory.  Then reboot system.

Hopefully someone else can chime in who has experienced similar issue.  If I remember from other posts around that year others have seen screen failures which require replacement.  

Good luck.  

Share this post


Link to post
Share on other sites
GREGFIEBER

battery cables were disconnected for the winter,    i will try that once more just to be sure.   

Share this post


Link to post
Share on other sites
Heard

Did this happen while on the water or when?

Share this post


Link to post
Share on other sites
wdr

IME, if the Malivue screen is the only thing not working on the dash, I would head straight to the back of the amp board and check to see that the “blue Malivue screen cable” is plugged into the RFX-3000 (black box). 

Share this post


Link to post
Share on other sites
wdr

It may have come out of the back of the Malivue screen in the gauge pod, but that is highly unlikely. The other option is that is got pulled out of the Viper control module under the dash. If you get on your back with a light you can see the blue cables coming out of the Viper. A simple 3 finger push will reseat them if needed. 

Edited by wdr
Sp

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...