Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Skiier64

Cold start problem

Recommended Posts

rkgallagher

We had the same problem with our '02 Monsoon engine. Once we sent the ECU to Indmar to be programmed with the latest s/w, it was fixed. Good luck.

Share this post


Link to post
Skiier64

Hmmm, maybe I'll have to bug my dealer some more about the ECM software. They said it was the latest version, but now im not sure.

Share this post


Link to post
Sunsetter95
We had the same problem with our '02 Monsoon engine. Once we sent the ECU to Indmar to be programmed with the latest s/w, it was fixed.  Good luck.

Call Indmar. See if the dealer has the latest ver of S/W

Share this post


Link to post
R1LOVER

Use WD-40 to check for leaks, it will lube abd protect and metal parts while you are testing - just wipe off excess when your done.

Share this post


Link to post
Skiier64

WD40 would be a lot safer too. Thanks.

Share this post


Link to post
NorCaliBu
WD40 would be a lot safer too.  Thanks.

A little safer, yes. A lot safer, maybe not. WD-40 is still very flammable so still be very careful. WD-40 will actually work as a quick-start boost in a pinch. Just be careful and you'll be fine.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...