Response TXi not clicking into neutral.

[rschuster]

2014 Response TXi is not clicking and stopping at neutral.  You can just throw it strait from forward to reverse without clicking the button. It’s as if the button is stuck down but visibly it is not.  I’m hopeful that this is a simple fix and I suspect there is already a post about this. 

[NHolladay]

Should be drive by wire so likely somthing with the throttle unit itself probably best to poke your head in there and visually inspect to see if you can identify something.  Not a good problem to have be very careful you dont make the mistake of shifting it while above idle.

[soundingbusy]

There is a post "Neutral lockout broken", 20 or so posts down from this post, that discusses this issue. I have a txi with the same issue.