Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2007 LCD screen dark and blank


Recommended Posts

I have a 247 LSV wakesetter with a blank lcd screen, so i was unable to use the cruise system on the weekend. I cycled the engine and turned off the batteries a few times but it did not solve the problem. Checked every relay, but they were fine. Boat runs good and every other guage works fine. Is there a fuse under the dash specifically for the lcd display? Its been very rainy/stormy over the last couple weeks so wondering if it may just be moisture getting into the display causing issues. Wont have time to evaluate it again until next weekend, so was just wondering if anyone else has had this problem or has any suggestions to try next time im out. 

Thanks for any input.

Link to comment

No, but will verify its still plugged in when i get out again...perhaps some rough water dislodged something an electrical connection. Would be nice for an easy fix. Thinking it could be ssomething simple like that, as not alot of people have had issues with the older lcd screens. 

Link to comment

Just an update for future troubleshooters...

LCD functions fine now.

it was a little glitchy when I checked it out again. (buttons not working and screen intermittent....but at least working sometimes)....checked the electrical connections and used a fan to air out the area.

After a couple days of use seems to all function 100%. Got a lucky this round. Think it was a moisture issue.  

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...