Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

WhiteWaterWeb

Help! Small nick in the gelcoat...

Recommended Posts

WhiteWaterWeb

Hi all - we are loving the new 2018 VLX and you have to expect things like this to happen...just perhaps not so soon. We have a small nick in the gelcoat on the back of the boat (in between the two seats)...about the size of a kids fingernail. It will bug the hell out of me - how do I fix?

I am a pretty handy guy but I don’t want to butcher it...help!

Share this post


Link to post
Share on other sites
Weaklink

check out spectrum color patch kits. spectrumcolor.com

 

Comes in factory colors. My friend repaired his supra. Spread it on with a popsicle stick. Let it dry, sanded, buffed out like new. I haven't used it yet but I wouldn't hesitate to get it.

Share this post


Link to post
Share on other sites
WhiteWaterWeb

Thanks @Weaklink man! Keep the tips coming fellas...I am an anal guy when it comes to things like this...but I disguise it well. The boat is all about having fun :)

Share this post


Link to post
Share on other sites
vanamp

I use have used the spectrum kits with great success. Once i get the gel repair on I do the following:

-Wet sand from 800 grit to the finest sand paper I can find (i think its 2000 grit)

-polish with wool pad and hula boat care compound

- I have a 3 pack kit of foam pads from chemical guys (high cut, medium cut and polish).  I work from high cut to the polish pad with the hula compound. 

-wax with hula wax and seal with hula polymer sealant. 

I have a DA polisher. A DA polisher will take a little more work than a rotary but you can't really get into any trouble with a DA polisher.  Rotary polishers are able to generate more heat so you have to be a little more careful

Share this post


Link to post
Share on other sites
NAM75

I have to remount my Bimini. The previous owner did a crummy job.

Would this work on the screw holes?

Share this post


Link to post
Share on other sites
Imracin68j

Let a pro fix it.  I had a crazy crack across a stripe I thought could never be fixed. Found a guy in ca that fixed it to perfection. Search your area, it’s not crazy expensive to fix. 

Share this post


Link to post
Share on other sites
carguy79ta

I had a pretty good chip in the gel on my old Crownline (Crownie) about the size of a half dollar.  A local fixed it to perfection for 350.  Only hassle was hauling to him, then picking it back up.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...