Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2008 23LSV Power Wedge Problem


Recommended Posts

Need some advice.....Power Wedge will not go Down. Does not have fuse, rather a circuit breaker, pulled and replaced with 30a fuse, actuated via mux switch (recently replaced) wedge would not deploy and fuse did not blow. Checked voltage in medallion box, and have 12 v when toggling switch down on black wire, but never get power to white on either up or down. Can her very faint noise when we toggle the down switch at the actuators. Did check power at rear of boat in engine compartment as well when toggling down and had 12v on the black wire. Any help/advice would be greatly appreciated. 

Link to comment

Forgot to mention, attempted to calibrate to fix, but the only thing that changed was the position gauge went from up to down, while wedge remained up. Attempted to re calibrate trying to get the gauge to read properly with no luck. Gauge still indicating down with wedge still up????

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...