Jump to content
Sign in to follow this  
malibucanuck

Engine Cover Lifts

Recommended Posts

malibucanuck

Hey everyone

I'm trying to find replacement gas lift springs for the engine cover on my 93 Eshelon.

Can anyone put me i touch with a supplier?

Thanks

Doug

Share this post


Link to post
Share on other sites
Mike00LXI
Hey everyone

I'm trying to find replacement gas lift springs for the engine cover on my 93 Eshelon.

Can anyone put me i touch with a supplier?

Thanks

Doug

Basically any auto parts store.

Share this post


Link to post
Share on other sites
Jimmy Buffett
SPD Hardware Get the model number off your old ones and call them and they'll tell you which one you need to replace it. I'm pretty sure this is the OEM supplier. Edited by Jimmy Buffett

Share this post


Link to post
Share on other sites
Pistol Pete

You might save some money if you just bring the old one into a NAPA store and have them cross reference it to a new one. It'll be a lot cheaper than buying one at any "marine" store. (And I don't mean Semper Fi.)

Share this post


Link to post
Share on other sites
meb885

Don't know where to find them for the Eshelons..... Now if you have a Echelon, i would agree with these people, you will get raped at a Marine supply....just go to NAPA or Murrys or Autozone, etc..... i dont remember the exact size on the one i just replaced....just take one with you.

Share this post


Link to post
Share on other sites
JDubya

I just replaced the 2 for the motor box and the bow strage door and it was about $60 from the dealer for all 3. That is not to bad. I found that it was hard to find ones that had the right PSI and length that I needed. I could not find one that matched so I just called up the dealer.

Share this post


Link to post
Share on other sites
jgouveia3
SPD Hardware Get the model number off your old ones and call them and they'll tell you which one you need to replace it. I'm pretty sure this is the OEM supplier.

call these guys, and if you do any salt water at all, spend a few extra bucks and get the SS version.

Share this post


Link to post
Share on other sites
D-GOOSE
You might save some money if you just bring the old one into a NAPA store and have them cross reference it to a new one. It'll be a lot cheaper than buying one at any "marine" store. (And I don't mean Semper Fi.)

Yes.gif 2nd that one.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×