Jump to content
Sign in to follow this  
Ryan1776

Tsunami 800 vs 1100 gph lower housing

Recommended Posts

Ryan1776

Just a quick mental check, the actual base housings between the 800 and 1100gph pumps are the same, correct? 
Meaning I don't have to remove the lower housing from the ball valve when upgrading the pumps, I can remove the top motor assembly itself and drop in the new 1100gph? 
 

Share this post


Link to post
Share on other sites
vanamp

The housing are identical except the outlet size is bigger on the 1100.

You can interchange them but you will not see a performance boost using a 1100 motor in an 800 housing. I kept replacing my bad pumps with 1100s and saving the housings until I had enough housings to upgrade them all and run larger hose. 

Share this post


Link to post
Share on other sites
Ryan1776

Ok cool, thank you. 
I'm also upgrading the hose as well. Just wanted to see how much disassembly I needed to do! 

I figured they were the same, thank you for confirming! 

Share this post


Link to post
Share on other sites
vanamp

Just to be clear if you are upgrading to larger size hose you will need to replace the 800 housings with the 1100.  The 800's have a 3/4" discharge connection the 1100's are 1 1/8" discharge.  Motors will fit in either housing. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×