Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Driver seat removal


kayjayfech

Recommended Posts

1 hour ago, oldjeep said:

If the 2007 is the same as my 2012 then you remove the plastic block off plate on tge front of the seat base and access the seat track nuts by reaching through the hole. 

The 2007 and 2012 are different but I think what I stated above was right. I have removed both.

Link to comment

I figured it out. Here it is step by step to install the new seat riser...

1. Remove bolster seat (8 bolts)

2. Remove seat cushion (4 bolts and peel back carpet)

3. Remove seat off large plate (4 bolts)

4. Remove large plate (4 bolts)

5. Remove entire bracket (8 bolts)

6. Then remove black plastic/rubber slide cover (4 screws-these can easily break)

7. Then remove the swivel (circle) (4 bolts)

I can attach pics if you would like  

 

Link to comment

Some times you just need to start taking things apart and you can figure it out. Unfortunately there was no easier way to do it. Every bolt must need to be removed to do it right. 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...