Stereo Upgrade Help

[Internetguy]

Would be pretty simple if you can find the right connector and you have some crimping skills/tools. You could use the "high level input" to make it easier as that connector is easy to find. the output though, might be difficult to source.  Call wetsounds and ask if you can buy them or at least give you some part numbers. Everytime ive called them they are super helpful.

[COOP]

There is a thread here in the forum where someone found the plugs. I think you would need to put pins and wires i them, but he even had links to where he bought them.

[CaseyO]

Thanks, I found multiple threads on this topic but didn't see one that called out the connectors???  I also just read that the bigger problem might be the reprogramming required to be able to bridge and run 400 w to a pair of Rev10's.  I see it has been done but might not be worth the hassle of tracking down a dealer with access to do it.

[MLA]

That amp was setup for in-boats. No way you'd want to run it as is in bridged 2 chnl mode. 

[sdynak]

Hopeful MLA is still around  .. Your knowledge is really helpful and wonder what your thoughts on this may be. 

I know this thread has been quiet for 2 years but I'm looking at a similar setup with 4X Revo 6's and 1X Revo 10fa s4 Sub currently setup with an installed SYN-DX6 with the Revo 6's on channels 1-4 each and the Sub bridged on 5-6.

I am thinking of adding a set of Rev 10's and have 2 more amps currently not installed. I have 1 HTX4 and 1 HTX2. From what I'm reading in this thread it seems I can get more power 150 RMS to my Revo 6's each using channels 5-6 @ 2 ohms instead and consider if I add a pair of Rev 10's use channels 1-4 for 400W to each by using my SYN-DX6. Do I have this correct?

Then maybe use the HTX-2 for the Revo 10fa s4 Sub?

Would the HTX-4 be useful in any of this? Trying to decide on selling either the HTX-2 or HTX-4 as I don't think I need all of them and looking to make the right choice for my plans. 

Thanks in advance..

BTW this is on a pontoon but this forum and thread came up while I was looking at options and really exactly what I'm doing. 

Stan