JJs stero build.

[shawndoggy]

1 hour ago, Chrisjjbrown said:

Shawn thanks for info.  I might need to hit you up if i run into any issues since your the stero master.

Completely off topic but I remember a thread last year where you recommended some blue liquid detailer as opposed to boat candy or boat bling for half the cost.    But I can't seem to find that thread. 

http://pacificprodux.com/1-gallon-of-zip-mist-wipe-1-towel-1-sprayer-1-bottle/

[ConnollyCrew]

7 hours ago, Stevo said:

Huh. @Chrisjjbrown I wonder where he could of heard that.

 

I smell history here.....?

[ConnollyCrew]

On 3/26/2017 at 0:38 AM, bamaboy said:

First things first....Get yourself some good strippers....The wire kind

Strippers huh? Careful what you say, remember JJ admitted being retarded earlier in the thread....?

Edited March 30, 2017 by ConnollyCrew

[Stevo]

12 minutes ago, ConnollyCrew said:

Strippers huh? Careful what you say, remember JJ admitted being retarded earlier in the thread....?

Mine showed up yesterday...

and a pack of screw down zip ties . Ish just got real.

[Chrisjjbrown]

1 hour ago, ConnollyCrew said:

Strippers huh? Careful what you say, remember JJ admitted being retarded earlier in the thread....?

I prefer the human kind 

[Stevo]

1 hour ago, Chrisjjbrown said:

I prefer the human kind 

Of the 4-10" or below variety 

[bamaboy]

10 hours ago, Stevo said:

Mine showed up yesterday...

and a pack of screw down zip ties . Ish just got real.

You mean keyed hose clamps?  Get it straight dude.  

[Stevo]

8 minutes ago, bamaboy said:

You mean keyed hose clamps?  Get it straight dude.  

No i meant screw down zip ties

 

[Chrisjjbrown]

Ok so I made some progress today.   

Found the speaker wires.  

They are run into a connector and are run to the black box with all the other wires. 

I removed the factory sub box.  It was a royal pain in the a$$

 

And I ran all my RCAS and power wires for the WS-420 BT.   I was able to do it with only removing the top cover to the hard tank reaching in the corner and then running it in btw the wall.  

 

Oh and the Qbomb fit..... thank god.

Also I checked out my sub on the 400.2 and it worked.  So that was good news.

 

 

 

 

Hopefully btw tomorrow and Sunday I can get the new amps hooked up wire up the 420, wire and mount the tower speakers and sub.  

[Chrisjjbrown]

 

I got this in the mail today.   I was pretty excited. 

 

[Chrisjjbrown]

Ok want to check with everyone and see if this is a good place to start with the SD4 settings.   I will be bridging 1 set of Rev 10s.  

High pass

cross over 80

mono

source select channel 1/2

Gains set at Min 

 

 

Edited March 31, 2017 by Chrisjjbrown

[ConnollyCrew]

7 hours ago, Chrisjjbrown said:

Ok want to check with everyone and see if this is a good place to start with the SD4 settings.   I will be bridging 1 set of Rev 10s.  

High pass

cross over 80

mono

source select channel 1/2

Gains set at Min 

 

 

Make sure to video the smoke coming out of your Rev10's! Jesus, SD4??? HahahahhahahaHahahahahaha

Love it!

[ConnollyCrew]

7 hours ago, Chrisjjbrown said:

 

I got this in the mail today.   I was pretty excited. 

 

What did you to TO that amp? Slay it?

Edited March 31, 2017 by ConnollyCrew

[bamaboy]

That amp has a seedy and disgusting history of being man loved by multiple balding old men.  

 

Just don't put a black light anywhere near it.

Edited March 31, 2017 by bamaboy

[Twitch02x]

Looking Good!!!!!!!

[Chrisjjbrown]

Made some progress this morning.  

Its raining here in Ohio and I can't fit the boat in my 3 car Garage believe it or not so I am stuck working under the cover.  

 

Removed the old amps and Got the new amps wired and mounted up.   

The both have power and turn on .  

I was pretty amazed how much better the javelin made my inboats sound.   Night and day difference.  

I didn't remove the amp rack  there were some challenges but over all not terrible  

 

 

 

Edited March 31, 2017 by Chrisjjbrown

[Chrisjjbrown]

7 hours ago, ConnollyCrew said:

Make sure to video the smoke coming out of your Rev10's! Jesus, SD4??? HahahahhahahaHahahahahaha

Love it!

Is that too much ?   

Word on the street is you were running that too   

Stevo and even David said it is fine.  

[David]

33 minutes ago, Chrisjjbrown said:

Is that too much ?   

Word on the street is you were running that too   

Stevo and even David said it is fine.  

Yes, that IS massive power even for a large speaker like the Rev10. But if tuned correctly and used with the correct disciplines, the over-the-top power should be all positive.  

[minnmarker]

1 hour ago, Chrisjjbrown said:

amazing much better the javelin made my inboats sound.   Night and day difference. 

Just wait until you hear them with the cover off!

[Chrisjjbrown]

1 hour ago, David said:

Yes, that IS massive power even for a large speaker like the Rev10. But if tuned correctly and used with the correct disciplines, the over-the-top power should be all positive.  

David. 

 

Did you see my settings for the SD4.   Do those look like a good Starting point   

 

Edited March 31, 2017 by Chrisjjbrown

[Chrisjjbrown]

Well finished up for the Day. Pretty happy with my progress.  Considering I spent the entire day under the cover.   

All that I have left is to mount the tower speakers, mount the sub to the qbomb and secure to the floor.  Then figure out how to make a new kick panel. 

 

 

 

[ConnollyCrew]

3 hours ago, Chrisjjbrown said:

Is that too much ?   

Word on the street is you were running that too   

Stevo and even David said it is fine.  

I am running 400 rms to each can with syn DX 4 bridged.

I have the SD4 on inboats and SD2 on sub.

Edited March 31, 2017 by ConnollyCrew

[MLA]

1 hour ago, Chrisjjbrown said:

 Then figure out how to make a new kick panel.

This is why i like to build a custom enclosure, rather than a store bought, Design the enclosure to mate to the existing woofer hole. Retain the original facade with OEM matching carpet. 

[Pnwrider]

How come the amps are mounted all crooked? 

[IXFE]

3 hours ago, MLA said:

This is why i like to build a custom enclosure, rather than a store bought, Design the enclosure to mate to the existing woofer hole. Retain the original facade with OEM matching carpet. 

Done it both ways... me thinks a new facade is a lot easier to cut out and carpet than building a custom box with complex math, angles, etc.  

There may be other reasons to go custom, but this isn't one of them, imho.