Wetsounds 420 bt Cutout and hole dimensions

[jhartt3]

Anyone have these available or near by they can go measure for me ... the wetsounds website shows dimension on the sq version but not the bt version.

[Chia]

phone/email wetsounds and ask them. they are very helpful, very customer service orientated (my experience).

[jhartt3]

that was the plan if it made it to monday.  was hoping someone would have it on sunday so i could work on it this weekend. 

[Levi900RR]

I just measured the chassis of mine. I took a spare piece of plywood I had kicking around to test fit it / make a template. You could even use cardboard if you needed to. 

[jhartt3]

Yeah that would have been nice but i dont have it ..

 

I did call wetsounds today the size of the BT is the same as the dimensions on the SQ the face is just larger to accomodate the BT antenna in the center below the nobs.  I'll post my box when i'm done building it still debating on mounting location etc. 

[jonyb]

I've got a template made that I can copy and send to.you if you want.  It's only the cutout but it's a perfect match.  You could use it to cut out the hole for yours.