Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

335 Monsoon engine drain plugs


Recommended Posts

You should have two block drain plugs.  One on the port and one on the starboard side.  Port side is just a brass plug and Starboard is a knock sensor with brass plug.  If I remember correctly, the knock sensor plug required a 3/4 deep well socket to remove after you pull the wiring plug off.

Link to comment

Should be two, one on each side, about middle of the block down low.  Mine are brass and 9/16th inch.  Recommend an eight-sided ratchet bit (I've buggered the edges up using sixteen-toothed).

Since you have the Monsoon (I have the LCR), one of yours will be wired for knock sensor.  Exact same location, but you will need a different ratchet bit to remove it.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...