Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

How to pull RCA's from one side to other


DirtTrailMedia

Recommended Posts

What's the best way to run 4 pair of RCA's from the driver side over to the storage compartment where the batteries and amps are on the other side of the boat?

Edited by DirtTrailMedia
Have a new problem, didn't want to make a 2nd thread.
Link to comment

personally I used a fish tape* and pulled wire through the 2" square hull support. It's a shorter run and put the cables right where you need them.

* Really I "cheated" and used the RF Punch wire to pull some paracord through and then pulled enough paracord that I could leave enough (neatly) on either side to fish things back and forth if I ever needed to again.

Link to comment
On 9/26/2016 at 11:22 PM, Roush611 said:

I think a lot of people run them around the bow

That's what I ended up doing, super easy. I had 4 sets of RCA cables and the 3 wires for the Exile Zone Controller - I just tape them all into 1 and just need to zip tie them up with the vent hose that runs from one side to the other.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...