Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Getting boat up off the bunks for EZ ON EZ OFF


Recommended Posts

EDIT:  Looked for a thread but did not find one specifically on this.  (the lifting part).  End EDIT.  My new (to me) boat has some discoloration, reddish brown, only in the very rear and the area where it sits on the bunks, from prior moorage by prior owner.  Would like to get that off, and put some polish and poly on to re-seal it. Seems like EZ ON EZ OFF or toilet bowl cleaner or Miuratic acid is the way to go, but I don't really want to climb under and work with that stuff while, and there are stains that would be covered by the bunks anyway.  So I want to get it up off the bunks so I can use a sprayer, and a brush on a stick, then put some sealant or good boat polish on after dry.   I have done a search, and cannot find any threads on how to safely do this.  Suggestions?  Or, I could pay some guys in Boise to do it, but that sounds expensive.  

Edited by sunvalleylaw
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...