Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Power Question- Rev 10 and PPI


Roush611

Recommended Posts

Yes I know, not another one of these threads ha ha ha. Well the tower enclosure that came with my boat is shot. It is a custom build with 4 4" speakers and it looks like 2 HLC's of some sort and a down firing 12" midbass on the bottom. Well I finally actually listened closely the other day when it was on and realized I only have 1 speaker of the whole thing working. 

275DC9BF-9FAD-4BE3-9588-4DF0AB5613E6_zps

The amp powering the tower is an old school 800.5 PPI amp. I have a friend of a friend that is an audiophile that says he can rebuild the tower for $600. The unknow after this is how it will sound in comparison to say a set of rev 10's. So will the 800.5 PPI power a pair of Rev 10's? I am thinking I would rather spend the money on something I know is going to perform how I want it to, but the money aspect is always in the back of my head. 

 

Any input is appreciated. 

Edited by Roush611
Link to comment
1 hour ago, David said:

At 2 X 200 watts (if that's correct?) on a pair of Rev10s it would be enough. Good but not great.     

Yea my understanding is bridged it runs 200x2 at 4ohms. 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...