Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
MalibuReady

2012 MXZ Ballast Issues

Recommended Posts

MalibuReady

We've been out all week and have started noticing the following;

1.) The front ballast is filling to the point of raising the front cushion and then it slowly drains over time to sit flat again. Maybe even to the point of not full.

2.) The center stock ballast isn't registering. I can't tell if it's full, half full or empty. 

Any suggestions on what's going on?

 

 

 

 

 

Share this post


Link to post
MaliWop

My MXZ does the same in the front. It only lifts slightly. Not enough to worry me. When I put the bow bag on top of the cushions, it does seem to push some water out once under away. It's not much though. I thought about putting a check valve in, but not sure if they'll hold up to all of the weight/pressure from the bow bag being on top of the tank. I'm sure others will chime in with a solution, it's just never made enough of an impact for me to look further into it. In regards to the center ballast readings, check the wires on the tank to make sure they haven't come apart. Start there and work your way back through the system.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...