Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Manual Wedge Pin Stuck even when depressed?


Recommended Posts

Hi All!
I have a 2007 Malibu Response LX I just bought a couple months ago. I tried to put down the manual wedge, and one of the pins will not go in all the way. I verified that I was pinching in both pins all the way, but the starboard pin, even though depressed all that way, would not move the pin in the bracket in *enough* so the wedge could move. I could feel the pin with my fingers still stuck in the bracket even when depressed all the way.. The frame of the wedge does not seem that it was hit and was still in alignment. It merely seems the pin is "hanging out there" in the frame even when depressed appropriately. Any advice? Thanks!

Edited by zeltzrot
Link to post

If you have the pins squeezed all the way together it is still possible that they are not centered leaving one side latched.  Try pushing more to the side that isn't latched if that makes sense.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...