stusumm 0 Posted May 2, 2005 Has anyone else had trouble with the front ballast draining on its own?I can fill the tank and after 1 or 2 pulls it is empty again. The water is not going into the bilge area so it must by siphoning out the drain port. Anyone have a clue? Go to top Share this post Link to post Share on other sites
DC9669 0 Posted May 2, 2005 Sounds like some warranty work for your dealer! Go to top Share this post Link to post Share on other sites
stusumm 0 Posted May 2, 2005 She is there as we speak. Just wondering if it was a common problem? Go to top Share this post Link to post Share on other sites
Jimmy Buffett 64 Posted May 2, 2005 Might just be draining back out the fill line. Others have suggested the line needs a loop in it above the water line, or an inline check valve. Go to top Share this post Link to post Share on other sites
actionadd 0 Posted May 2, 2005 Most likely draining out the fill line, there should be a high loop in the line to keep it from draining out, the loop should be higher than the water line. Go to top Share this post Link to post Share on other sites
SacRiverRat 1 Posted May 2, 2005 Is the front tank a hard tank, or a sack? Go to top Share this post Link to post Share on other sites
stusumm 0 Posted May 3, 2005 Is the front tank a hard tank, or a sack?<{POST_SNAPBACK}>It is the new 350 gallon hard tank. The dealer indicated that they have seen this problem more than just a few times. I'll be interested to see how they fix it. Go to top Share this post Link to post Share on other sites
BenBu 0 Posted May 3, 2005 yep,same problem here only mine drains half way after a few pulls ,..i will look at the fill line loop. Go to top Share this post Link to post Share on other sites
