Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

name that part


Recommended Posts

I changed out my wedge , and the mounting screws from this bracket used the interior holes on the edelbrock wedge. The new wedge uses the 2 outer screw holes (wedge for a holly so there is only 1 hole on each corner ) It is the bracket that holds the throttle spring . Need to get a new bracket that would mount up to a holly carb.

 

20160622_193345.jpg

Link to comment

I made the same kind of swap a few years ago, ended up making my own.

I noticed the throttle linkage in the photo is on an angle, this ends up putting a side load on the butterflies.  This causes them to rub and wear away the throttle bores. 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...