Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

medallion power module problem on 2009 wakesetter 247

Recommended Posts

I have a problem with my medallion power module I think.  the right ballast pump was not getting any power so I replaced the fuse (which had blown) and now nothing on that board responds.  When pushing the buttons on the Mux units, they  try to turn on the accesory but then emediatly go back to off. It's like the board has no power going to it or the main board can not see it.  I checked all the fuses and they were good.  Without a diagram I can't do much more testing.   I've tried to locate a replacement board online but to no avail.  The boat is not that old.  does anyone know where to buy a new board? Medallion doesn't list one on thier web site.  Is there an alternate manufacturer or a good source for after market parts? The part number is 1539-10370-01 (PWR mod H-Bridge CAN TERM) 08/19/15 REV:H

Edited by bwfredette
Link to comment
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...