Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Surf Gate


JCmailibu

Recommended Posts

I believe you need to be moving before the gate will engage. I think they will deploy over 7mph. But as DAI stated, ballast is not required. 

  • Like 1
Link to comment
1 hour ago, sounddude03 said:

I believe you need to be moving before the gate will engage. I think they will deploy over 7mph. But as DAI stated, ballast is not required. 

That is correct. There is also a manual setting in the controls to open the gates for service if needed. You can find it in the control panel under settings and surf gate I believe. 

Link to comment

On a 2015 LSV, it needs to be calibrated before it will deploy. After a software update mine would stay in the "ready" state and wouldn't deploy. After calibration it worked fine.

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...