Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Move racks on g4


t a

Recommended Posts

Right now, my racks are in lower position and I think I'd like to move them to the upper so it catches the rope less. I don't see any bolts going through the tower mounting them though. How is this done?

Link to comment
57 minutes ago, t a said:

Right now, my racks are in lower position and I think I'd like to move them to the upper so it catches the rope less. I don't see any bolts going through the tower mounting them though. How is this done?

 

The tower is pre-drilled to accept the racks in the upper position. Just find the threaded holes up top and move the brackets up there.

Link to comment

Step 1. Remove the set screw that is holding the rack onto the bracket.

Step 2.  slide the rack off of the bracket

Step 3.  unbolt bracket from lower position and remount in top position

Step 4. Slide rack back onto bracket

Step 5. Reinsert set srcew that holds rack in place on the bracket.

  • Like 3
Link to comment

Make sure to use a little blue lock-tite on all the mounting hardware and set screws, it lubes the stainless going into the alum. and will keep things from vibrating loose on the water.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...