Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

JL Audio JX500/1D


soonerbilly

Recommended Posts

OK so I know I'm a DA.....but I got one of these amps for my sons truck ( yes its an F150 :tease1: ) My question is in the wiring. The amp has 2+ and 2- terminals for wiring. I have 2 4ohm 10's and wanted to get them to a 2 ohm load. Do I simply wire each + on each 10 to its own + terminal.....same with - ? Or is it more complicated?

Link to comment

You can wire the drivers together in parallel and just use one + and one -, or you can wire each driver to its own +/- at the amp. Fielder's choice. As long as the impedance load is right the amp will see either option the same way.

Link to comment

Thanks Shawn....that was my question. I just wanted to make sure the amp would see it that way or if they were different channels. I got the amp used so I didn't have a manual and the website info was kinda vague.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...