Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Depth guage ?


Mpuppy

Recommended Posts

Does anyone know if the depth guage on a 2015 maliview screen be changed to show tenths increments?

My buddys 14 LSV will show 5.5ft for example and my 15 VLX will only indicate 5 or 6 feet with nothing in between.

Link to comment

Should've bought a Mastercraft. They have 87 layers of hand laid fiberglass, carefully placed by Buddhist Monks. You don't have to worry about depth in a MasterCraft, the hull is so thick just cruise right over whatever object is in your way. And you can also surf anything, because the wave is channeled straight from Hawaii. It's so Hawaiian, the mist from the wave forms the ghosted image of a Samoan totem pole and brings you tropical drinks.

As for the depth gauge, I don't know what specific setting screen you need. My '06 does it automatically.

Dumb question, but have you cruised through the setup area to see if there's a menu for gauges / calibration?

If you push on the hull it also makes bongo sounds like Jumanji. And Donovan Frankenreiter pops out of one of the back hatches and plays you a tune on the ukelele

Edited by CodLip
  • Like 3
Link to comment

Should've bought a Mastercraft. They have 87 layers of hand laid fiberglass, carefully placed by Buddhist Monks. You don't have to worry about depth in a MasterCraft, the hull is so thick just cruise right over whatever object is in your way. And you can also surf anything, because the wave is channeled straight from Hawaii. It's so Hawaiian, the mist from the wave forms the ghosted image of a Samoan totem pole and brings you tropical drinks.

As for the depth gauge, I don't know what specific setting screen you need. My '06 does it automatically.

Dumb question, but have you cruised through the setup area to see if there's a menu for gauges / calibration?

I thought that was doc for a second with your avatar and Mastercraft talk.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...