Wetsounds 420 Microphone, where do you clip it?

[kayakwv]

Getting a 420 BT installed today. The microphone has a spring clip on it. For those that have the 420, what do you usually clip the Mic to?

Thanks.

[wdr]

I have some thin stainless sheet that I bent and rolled into a bracket which I attached to the back side of the walk through (right below the 420 left of the steering wheel) using the existing panel screw that holds the walk through panel to the fiberglass. I made the bracket tall enough that the spring clips lip doesn't extend past the end of the bracket so I don't have to fight to get it off. Merely push it open to slide it on.

[shawndoggy]

[baadls1]

Shawn, you can't tease us with that without sharing a link from where you got it!

[baadls1]

Looks like searching for "Microphone hanger button" or variations thereof will yield some results. Do you just re-use the existing set screw for the old clip?

Definitely doing this on my Sanger.

[shawndoggy]

I had to drill a hole in the back for the button. If you are lucky you can get the part at your local truckstop. I tried but they did not have the button so I ordered that on eBay.