Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  

Sunsetter Lxi NSS DIY

Recommended Posts


So I finally got to finishing my test DIY NSS.

Below is the first part of the build:


I used some wood I had laying around. I basically mounted it by drilling a hole on the swim platform and putting a bolt to hold it in place. It's fixed at a 30mm down x 40mm out. The NSS causes the boat to lift up on the NSS side, so after a few

I was by myself so I did not get to do any surfing. I did take some pics though...below is manual Wedge down, 600# in rear locker and in bow walkthrough along with maybe 150# behind the drivers side to level out the boat.





Share this post

Link to post

Looks good!. Have you surfed it or started dialing it in yet?

Share this post

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...