Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

No power results-Replaced stock receiver with new Kenwood


Wakeman23

Recommended Posts

Ok, replaced stock receiver on Suncape 23 LSV with Kenwood KMR-D362BT. Have hooked up with no power results. Amp not lighting up either. Attached red lead to red (tied to blue stripe white), black to black, yellow to yellow (tied to purple stripe white). This all ties thru harness to amp. All fuses good. all breakers reset. Power to rest of boat. New battery. Maybe should this be grounding a different way? Kenwood instructions say to ground with an amp separately, have tried that (black to ground) with no results. Thought maybe a ground issue. Suggestions needed. Thanks!

No tunes and unhappy crew. The distress flag is up!!!

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...