Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Wakeman23

No power results-Replaced stock receiver with new Kenwood

Recommended Posts

Wakeman23

Ok, replaced stock receiver on Suncape 23 LSV with Kenwood KMR-D362BT. Have hooked up with no power results. Amp not lighting up either. Attached red lead to red (tied to blue stripe white), black to black, yellow to yellow (tied to purple stripe white). This all ties thru harness to amp. All fuses good. all breakers reset. Power to rest of boat. New battery. Maybe should this be grounding a different way? Kenwood instructions say to ground with an amp separately, have tried that (black to ground) with no results. Thought maybe a ground issue. Suggestions needed. Thanks!

No tunes and unhappy crew. The distress flag is up!!!

Share this post


Link to post
Share on other sites
Roster man

Key is on correct? If so, you'll have to trace to verify power coming into the deck to see if is feeding juice. Multimeter time...

Share this post


Link to post
Share on other sites
MLA

Yep, grab a meter and verify that you have ground, B+ and switched 12V at the head-unit.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...