Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

RCA wiring question to ZLD


shenard

Recommended Posts

I am working on installing my Exile system and have a quick questions about how to connect the RCAs from the ZLD to my tower amps. I am going with a hybrid setup from Brian (2 pairs of surf towers and 1 pair of XM9s). I will have two Exile 30.2 amps powering them so I will be wiring the surfs in parallel and using one of the amps at a 2ohm load and the other 30.2 will be wired normally to the XM9s at 4ohms.

My question is should I go from the ZLD output for towers into my first amp input (Surf towers) and use the pass-thru output on this amp and then go to the other 30.2 amp for the XM9s so I can have fade control on all of the at once? I assume this is really the only way to wiring the RCAs and better than using a bunch of y adapters and female to female converters, etc.? Will post some pics in a new thread once I finish my amp rack and start putting in boat.

Thanks.

Scott

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...