Jump to content


Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  

Lifeform 9 Wiring Install Help

Recommended Posts


So I mounted up the LF9 LEDs to my '14 T22.

When I did this install on my previous boat I just tapped into the existing factory harness but this time I want to use one of the separate ACC switches (I have 1 available on the left bank and 1 on the right bank).

I know there's a wiring schematic on Lifeform's website here >> http://lifeformled.com/content/LF_9_Wiring.pdf

However, I know the ACC switches are already powered and wondering if they are already fused..I assume they are but not sure what amperage(s) and I'm not home to try to trace it back to the fuse panel.

Should I just simply plug the + and - from each (in parallel) into the back of one of the ACC switches? I suppose I could add a 5amp fuse in the circuit (per LF's instruction) as a bit of an insurance policy but hoping someone else has already done this install with an Axis.

I've searched the forums but haven't seemed to find these answers. Hoping the weather is descent in the coming days so when i get home I can finish this install and move on to the next one.

Thanks in advance for any advice.

Share this post

Link to post
Share on other sites

5 amp fuse close to the switch to be safe.

Edited by skurfer

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this