Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

89 Malibu velvet drive water in fluid


Recommended Posts

I'm in watching the fluids on my velvet drive and it got water in it at some point. I've sucked all the fluid out of it three times now and keep topping it off with fresh fluid but I don't ever seem to get all of it. That or something inside of it is leaking water into it. I have not looked very closely at it is there a water jacket inside that unit? Is there a trick to it draining all the fluid out of it? I've been using a vacuum pump through the dipstick hole .

Thanks in advance

Link to comment

My bilge had too much water in it which caused the shaft coupler to spew water into the trans vent. Always make sure your shower is turned off at the diverter valves, the valve on the shower head, and the switch.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...