Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
JAGMAN

Lake Temperature Display

Recommended Posts

JAGMAN

Does any one know where the signal for the lake temp display comes from? My '05 v-ride (Monsoon) started to show the water temp at around 110 degrees yesterday and then gradually crept up to 120 or so degrees (actual temp around 70). Any suggestions? I couldn't find where it gets its signal from, or if there is a way to calibrate it.

Thanks for you help.

James

Edited by jaguimond

Share this post


Link to post
Share on other sites
VinRLX

I believe my 03 has an individual temperature probe. After 03, I think the paddlewheel might have the sensor in it.

Share this post


Link to post
Share on other sites
chathamsolutions

Anyone that currently has 70F water temps in May doesn't deserve a reply.

Tongue.gif

j/k Sorry, don't know where the sensor is.

Share this post


Link to post
Share on other sites
BillFooter

Mine is mounted with the transducer for the depth finder. My air temp guage does not work. The company that makes this guage has had numerous problems with them and does not sell one under their own brand name. The guage has a one year warranty.

Share this post


Link to post
Share on other sites
JAGMAN
Mine is mounted with the transducer for the depth finder. My air temp guage does not work. The company that makes this guage has had numerous problems with them and does not sell one under their own brand name. The guage has a one year warranty.

I haven't examined my transducer, but I thought it was just a flat, flush black plastic disk. Where in transducer is the water temp sensor? Huh....Thanks for any aditional advice.

James

Share this post


Link to post
Share on other sites
BillFooter

Mine is mounted with the transducer for the depth finder. My air temp guage does not work. The company that makes this guage has had numerous problems with them and does not sell one under their own brand name. The guage has a one year warranty.

I haven't examined my transducer, but I thought it was just a flat, flush black plastic disk. Where in transducer is the water temp sensor? Huh....Thanks for any aditional advice.

James

Next trip to the lake I will climb under the boat and look at the bottom. I think mine is mounted in the same hole with transducer. I did not mean that it was built in to the transducer

Share this post


Link to post
Share on other sites
Dan M
Does any one know where the signal for the lake temp display comes from? My '05 v-ride (Monsoon) started to show the water temp at around 110 degrees yesterday and then gradually crept up to 120 or so degrees (actual temp around 70). Any suggestions? I couldn't find where it gets its signal from, or if there is a way to calibrate it.

Thanks for you help.

James

Share this post


Link to post
Share on other sites
VinRLX

Ok, this one had me totally confused. Welcome to the site, Dan M!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...