Jump to content
Sign in to follow this  
Cbrown

05 Vlx

Recommended Posts

Cbrown

For the owners of the new Vlx or 04 LSV with the bow ballast tank, how did you run your RCAs and remote turn on for the amplifiers? On the 04 Vlx I ran them through the bow but there was no front tank and on the new one I found a way to run them on the top portion of the bow but wanted to see how others had run them first. If you ran them under the floor what is the easiest way to do so?

Any help will be greatly appreciated.

Share this post


Link to post
Share on other sites
Cbrown

Btw this is for the amps in the observer area and the headunit in the factory location.

Share this post


Link to post
Share on other sites
stewart

There is a void you can run everything through. If you stick you head/body into the storage compartment behind the observer seat, look at the floor on the right in the front (towards bow). This is one place you can run the wires or grab the wires from.

Now, go to the drivers side, under the dash. If you remove the foot rest and look to the left (towards the bow) you will see the other side of the void.

I hope this make sense.

Share this post


Link to post
Share on other sites
Wkerat

Stewart got it, the lsv has a large void you can easily run everything through. The vlx you can remove the panel behind the ballast tank by taking out two screws on each side and then can run it easily.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×