Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Mackie 12

Sportster Maintenance

Recommended Posts

Mackie 12

BU Crew,

I have a few questions that I need a hand with and hoping someone can help me out.

Drivers seat removal, cant find any bolts to remove to take it out?

Can I screw into the floor board on a 98 model? want to build a 2" vertical lip for gunnel netting so we dont catch our toes in it walking by.

Share this post


Link to post
Share on other sites
Woodski

There should be 4 attachment bolts looking down from the top when you remove the seat cushion, nuts on the underside in the adjustment channel.

Yes you can go straight down or slightly inboard in the floor, it is fiberglass. Get a good look at the hull outer surface to determine the outer surface plane.

Share this post


Link to post
Share on other sites
jk13

Or attach your toe saver board to the vertical gunwale walls at the front and rear of the opening if you're not 100% sure.

Share this post


Link to post
Share on other sites
Mackie 12

Remove the seat cushion.............dont know why i didnt even look at that! Thanks woodski.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...