18" wheel conversion done!

[Nitrousbird]

Now debadged:

can you post some pictures of how you spaced your fenders out?

I just built a spacer out of 1/2" plywood and cut three of them, screwed them together and then put the backer piece for the fender onto them. Carpeted the whole thing. I then re-drilled the mounting holes further out. Still need to do some minor tweaks as I got a small amount of rubbing when going through some steep dips in a parking lot. I also either need to replace the now missing traction pad or have a piece of diamond plate cut for the fender.

Edited May 9, 2014 by Nitrousbird

[Fman]

If you are interested in the older 09-13 wakesetter decal PM me, I know someone who ordered there 2013 MXZ without them and I think he still has them.

[Nitrousbird]

If you are interested in the older 09-13 wakesetter decal PM me, I know someone who ordered there 2013 MXZ without them and I think he still has them.

If the price is right, I maybe. I like those as well but like the '14 better.

[Malibuzer]

Man that boat is clean! I would leave it naked. Classy boat.

[dfarhood]

My eyes could be deceiving me (it's hard to see in the picture) but it looks like you have directional tires and the port rear tire is on the wrong way. Of course that'll only really matter if you tow in the rain.

Anyway congratulations on getting the conversion done, now you can start using your boat again.

[Nitrousbird]

My eyes could be deceiving me (it's hard to see in the picture) but it looks like you have directional tires and the port rear tire is on the wrong way. Of course that'll only really matter if you tow in the rain.

Good eye. I ended scoring a nail in one tire (god knows how I did it but I did), so I had to get it plugged. They ended up mounting it the wrong direction. When I get my spare wheel/tire, I will just end up swapping this wheel to be the spare wheel.