Jump to content
Mika

Help with propeller identification

Recommended Posts

Mika

I'm trying to figure out which propeller do I have. :dontknow:

I found the following texts in my propeller.
The surface against the propeller nut (facing backwards):
OJ 1425 14.50 8.I (or 8.1 or 8.T or ?)

The outer diameter (surface between the blades):

OJ 210

What is this propeller? And how does it work with 2009 VLX & 350 Monsoon? (I haven't got the boat in water yet, that's gonna happen soon.)

Thx!

btw. If anyone is willing to sell ACME 537 or 1235 (in good shape) pls let me know...

Share this post


Link to post
Share on other sites
oldjeep

Although that doesn't make sense because the 8.1 is likely a cup measurement and the 475 is .90

Or you could just be reading the shaft size 1 1/8 incorrectly. How about a picture?

Edited by oldjeep

Share this post


Link to post
Share on other sites
Mika

Although that doesn't make sense because the 8.1 is likely a cup measurement and the 475 is .90

Or you could just be reading the shaft size 1 1/8 incorrectly. How about a picture?

Unfortunately I've got no photos that would help. Those marks are dim, partly covered by the shaft nut and very difficult to read. I tried to make photos with the smart phone cam, with no success...

Below you'll see the best photo. This mysterious 8.?? is "showing" at 4 o'clock.

The photo also shows the result of my 2-day waxing operation: see the mirror image of the trailer tire from the black bottom of the boat ;)

(Unfortunately that's the only place where this photo is sharp...)

2yjzz80.jpg

Edited by Mika

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×