Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

OJ #310 vs #316


bandStrider

Recommended Posts

Hello,

Anyone out there try the OJ props #310 (3 blade 13 x 11.5) vs the #316 ( 3 blade 13 x 12)? I had the people at OJ recommend the 310, but their guide and another person recommended the 316. We have a Mystere 215 LX and mostly slalom and foot. I'm asking here because the person I spoke with at OJ didn't really offer any difference between the 2 for performance and actually recommended staying with the Legend that is on there instead of the newer XMP's.

Thanks.

Link to comment

I've had both props on my RLXi. The #310 will provide a little stronger hole shot, will also spin more RPM's at speed. I'd expect you'll spin 100 - 150 rpms higher at WOT than compared to the #316. My guess is that you'll have similar top end speed on either prop.

I run the #316 on my 05 RLXi.

Also of note, you'll have better speed holding capability vs the Legend you're running today.

Link to comment

I called OJ the other day without much help also. They pointed me to the #330 13x11.5 LC 1-1/8 for Slalom, Foiling and towing the kids around with my 05 Response. They did say the #330 replaces an old cast 13x13 which is on my boat now. Later down the road I may switch to one of their 13x12 for more top end.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...