Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Replacement of ballast pumps LSV 2004

Betch

By Betch,
in Ballast Info & How-to

Recommended Posts

Betch Ballast Buddy

Betch

Posted
Posted (edited)

Two questions

1. For the pump that is not working can i just unscrew and replace the pump insert and leave the shell and housing of the pump attached for easier replacement?

2. I have the 800 GPH in there now can i replace these with the 1100 gph pumps?

Thanks

Betch

Edited by Betch
Link to comment
coyote055 Deck Hand

coyote055

Posted
Posted

The answer to #1 is yes.

#2 is going to be a bit of a challenge. The 800 gph pumps have a 3/4" outlet and the 1100 gpm pumps have a 1-1/8" outlet according to the cut sheet on the Bakes site. http://www.bakesonline.com/detail.aspx?ID=1613

SInce you would have to neck down from 1-1/8" to 3/4" going into your hard tanks anyway, I'm not sure that you would be gaining a whole lot.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go to topic listing
×
×
  • Create New...