Front ballast button missing after screen replacement

[mking]

Our touch screen went out and the dealer replaced it under warranty. Once we got back on the water I noticed that the button on the MLS to full the front ballast was not on the display. The tank does fill if using the presets so I know the tank is working and is connected.

Any thoughts on how to enable the button?

Thanks.

[jb 156]

look for a button labeled setup on the MTC, you should be able to check the box for front ballast once you are in there.

[mking]

look for a button labeled setup on the MTC, you should be able to check the box for front ballast once you are in there.

[mking]

look for a button labeled setup on the MTC, you should be able to check the box for front ballast once you are in there.

Thanks JB, I will look for that option this weekend. I thought I had looked through all the menus but but must have missed it.

[mking]

look for a button labeled setup on the MTC, you should be able to check the box for front ballast once you are in there.

JB, found the option and enabled it. Thanks for the resolution.

Mike