Oxidation

[wakebrdr94]

So, I have a small spot oxidizing on my boat, not sure how as I baby the thing, but as say it is a 4x4 spot on the transom. Is there a good cleaner/wax that can take care of this? Just really don want to get aggressive with it if I don't have too.

[longbeard]

Depending on how oxidized it is, you may could get away with some using some rubbing compound by hand and then a good waxing after that. If it is too deep you may have to bring out the buffer to knock it out. I highly recommend 3M rubbing compound.

[RTS]

I've had great results with the 3M light oxidation remover. Not too aggressive at all, but did a good job on the darker colors on my hull that were getting a little hazy...

[wakebrdr94]

Thanks guys, I'll give a try

[wakesetter8796]

Do you have a pic of it?

[nyryan2001]

Speed Gloss Cyrstal Cut Polish (level 3/10 abrasive) on a buffer ball then follow with a hard waxing...

[Kenw]

I've used Meguiars Color Restorer, followed by Polish and then wax with good success

http://www.meguiars.com/en/marine/products/m4416-mirror-glaze-color-restorer/

http://www.meguiars.com/en/marine/products/m4516-boatrv-polish-gloss-enhancer/

http://www.meguiars.com/en/marine/products/m5616-boatrv-pure-wax/

or

This package has the Heavy Duty Oxidation Remover

http://www.meguiars.com/en/marine/products/m4965-mg-fiberglass-oxidation-removal-kit/

[wakebrdr94]

I wasn't able to get the boat out today to get it done, but I'll have it out soon and put up a pic